20
DVD DVD-A
Selecting groups and titles
Use the remote control unit’s GROUP/TITLE buttons ( / )
to change titles and groups on DVD media.
If pressed during playback, these buttons start playback at the
selected group/title. If pressed during pause or stop mode,
playback is paused at the start of the selected group/title.
Note that some discs may start playback when a group or title
is selected, regardless of the pause or stop status.
When playback is stopped, use the PLAY AREA button to
select the playback area. Some DVD audio discs have DVD
video areas which can be accessed through this function.
Additionally, Hybrid Super Audio CDs may contain two or
more separate audio areas, selectable in this way.
The contents accessible as DVD audio and DVD video from
the same DVD disc may differ.
SA-CD DVD-A
Selecting the playback area
DVD VCD CD SA-CD DVD-A
Skipping playback
Press the SKIP button (. or /) repeatedly until the
desired chapter or track is found. The selected chapter or
track will be played from the beginning.
<
If the . button is pressed once during playback, playback
returns to the start of the current track or chapter. If it is
pressed within one second from the start of the track,
playback returns to the start of the previous track or chapter
(so pressing the button twice in quick succession will skip
back two tracks, etc.).
<
If tracks or chapters are skipped while playback is paused or
stopped, playback is paused or stopped at the start of the
selected track or chapter.
<
In programmed playback mode, these buttons will move
between tracks in the programmed order.
< When playing back video CDs with PBC, note the following:
the .
button is disabled. The / button is disabled in
resume mode, but is enabled in play mode. In pause mode,
the /
restarts playback at the start of the selected track.
DVD VCD CD SA-CD DVD-A
Selecting a chapter or track
Use the number button to select tracks or chapters for
playback. Use the +10 button to enter the first digit of
numbers greater than 9 (repeated presses show 1-, 2-, 3- etc.)
and the single digit buttons (0 through 9) for the second
digit, or single-digit track numbers.
CD (including video CD and Super Audio CD) playback starts
from the selected track, regardless of whether the number is
selected during playback or playback is stopped or paused.
DVD playback starts from the selected chapter or track if
selection is made during playback or stop. It pauses at the
start of the selected track if the selection was made from
pause mode. In stop mode, only chapters from the first title
can be selected.
Use the CLEAR button to clear mistaken entries.
To Next Page
Loading...
Need help?
General
