Need help?Do you have a question about the ESPEC CRITERION CHAMBER Series and is the answer not in the manual?
General| Temperature Control Accuracy | ±0.3°C |
|---|---|
| Temperature Range | -70°C to +180°C |
| Humidity Range | 10% to 98% RH |
| Internal Dimensions (W x D x H) | Varies by model |
| External Dimensions | Varies by model |
| Refrigerant | R404A or equivalent |
| Weight | Varies by model |
| Humidity Uniformity | ±3.0% RH |
| Heating Rate | 3°C/min (typical) |
| Controller | Touchscreen controller with programmable profiles |
Describes warning symbols used in the manual for safety and hazard identification.
Defines important terms used throughout the manual for clarity and understanding.
Lists hazardous substances that should not be placed inside the equipment due to safety risks.
Details safety devices designed to protect specimens from thermal damage during testing.
Describes the purpose, applications, and testing capabilities of the chamber series.
Explains the Balanced Temperature and Humidity Control (BTHC) system and its components.
Lists and describes parts located on the front of the chamber.
Describes ideal site conditions and required space for chamber installation.
Details voltage, frequency, and plug type requirements for the primary power supply.
Procedure for removing protective material from the water level regulator.
Covers arranging specimens and proper door operation for testing.
Lists items and intervals for routine checks and periodic maintenance.
Explains detectable troubles, alarm codes, and their remedies.
Instructions for safely resetting tripped circuit protectors.
Lists detailed technical specifications of the chamber, including performance and dimensions.
Steps for requesting warranty service or ordering replacement parts.
To Next Page
