Installation guide Bench-top type temperature(humidity) chamber
ESPEC CORP.
5
◆
Energy Saving Advice
◆
Set the operating temperature range according
to outside conditions.
Make sure that heat exhaustion from the
chamber is not blocked off.
Temperature in the installation site
Keeping an appropriate temperature in the installation site reduces
the load on the refrigerators and heaters imposed by the ambient
temperature.
Notes for installation
List of Center of Gravity Positions
WARNING
When laying the chamber onto the floor, be careful not to catch your
fingers in the chamber, forklift or any other equipment and not to have
the chamber fall down.
When using a forklift, make sure that the front ends of the forks are not
covered by the chamber.
CHECK !
D
H
W
To Next Page
Loading...
