DEAR PARENTS
Congratulations on your purchase of the children stroller JUST of the company BDG
PRODUKCJA SP. Z.O.O Travelling in it will most certainly be safe, comfortable and enjoyable
IMPORTANT: READ CAREFULLY AND KEEP IT FOR FUTURE REFERENCE
1. ELEMENTS OF THE STROLLER
1. Stroller frame with cover 2. Bumper bar 3. Canopy 4. Front wheel - 2 pcs.5. Rear wheel - 2
pcs. 6. Footmuff
UNFOLDING THE STROLLER
2. Press the locking mechanism blockade (1), then press the locking mechanism (2)located on
the stroller handle. Lift the handle.
3. Unfold the stroller pulling the handle up until locks on both sides of the strollerare locked in
place.
NOTE! Make sure that the stroller is properly unfolded.
ASSEMBLY OF FRONT AND REAR WHEELS
4. ASSEMBLY OF THE FRONT WHEELS
Insert front set of the wheel onto the hub until it is locked in place (you will heara clear click
sound). Make sure the wheel is properly secured. Repeat on the other side.
5. ASSEMBLY OF THE REAR WHEELS
Insert the protruding axle of the rear wheel onto the rear hub of the stroller. Make sure the wheel
is properly secured. Repeat on the other side.
ASSEMBLY OF THE BUMPER BAR
6. To assemble the bumper bar, insert the bumper bar assembly element intothe opening of the
bumper bar assembly mechanism located in the frame of the stroller.Repeat on the other side.
7. To detach the bumper bar, press the button of locking mechanism (1) and detach itfrom the
opening of the bumper bar assembly mechanism (2). Repeat on the other side.
BRAKE OPERATION (PARKING DEVICE)
8. Lift the lever to unlock the rear wheels.
9. Lower the lever to lock the rear wheels.
BACKREST ADJUSTMENT
10. To lower the backrest, lower the buttons of the backrest locking mechanism (1)
andsimultaneously lower the backrest (2) to the desired position.
11. To lift the backrest, hold the end of the belt of the adjusting mechanism (1) andsimultaneously
push the backrest to the required position (2).
CANOPY MANUAL
12. To change the position of the canopy, hold its top part and adjust it to the requiredposition.
13. To additionally enlarge the canopy, unzip the zipper in its middle part (1) and pull the canopy
to the front (2).
To Next Page
Loading...
