EasyManua.ls Logo

espiro JUST - Strona 15

espiro JUST
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FOOTREST ADJUSTMENT
14. To lower the footrest, press both buttons of the locking mechanism located underthe
footrest (1) and lower it (2).
15. To lift the footrest, lift its end part.
DISASSEMBLY OF THE WHEELS
16. DISASSEMBLY OF THE FRONT WHEELS
Press the button of the locking mechanism (1) and simultaneously take the front wheel off
the hub (2).
17. DISASSEMBLY OF THE REAR WHEELS
Press the button of the locking mechanism (1) and simultaneously take the front wheel off
the hub (2).
FOLDING THE STROLLER
18. Press the locking mechanism blockade (1), then press the button of the
lockingmechanism (2) located on the stroller handle. Push the handle forward.
19. Make sure that the stroller is properly secured against accidental unfolding.
SHOULDER STRAPS LENGTH ADJUSTMENT
20. Pull out the free end of the strap to remove any loose part.
21. Pull the fastener (3) to loosen the tension of the shoulder straps. Adjust the length of the hips
and crotch straps using the fasteners (4)
BUCKLE MANUAL
22. The stroller is equipped with a magnetic buckle. To unbuckle the buckle, press both buttons of
the buckle located on both sides at the same time and remove one part from the other one.
HOW TO LOCK THE BUCKLE
23. Insert the strap fastening mechanism in the back part of the buckle. Repeat
on the other side.
24. Attach two parts of the buckle with one other.
25. Attach the front part of the buckle with the back part until you hear the clicking sound.
Check if the buckle is properly locked in place.
ASSEMBLY / ADJUSTMENT OF THE SAFETY BELTS HEIGHT
26. To assemble / adjust the height of the seat belts, take them out of the openingsin the
backrest/seat unit and the upholstery and then insert through openingsin the upholstery and the
seat unit/backrest at the desired height.
NOTE! Before locking the child with the seat belts, make sure that the seat beltsare
properly assembled in the stroller.
FOOTMUFF
27. To assemble the cover on the frame of the stroller, insert its lower part ontothe footrest
and then fix the snap fasteners of the belts with the snap fasteners locatedon the sides of
the upholstery.

Related product manuals