FOLDING THE STROLLER WITH THE SEAT UNIT
Unlock the front wheels and fold the canopySeat unit can be assembled facing forward
and backward.
41. Fold the seat unit on the frame of the stroller
42. Fold the frame (1) and place the seat unit on it (2)
43. Make sure that the frame is secured against accidental unfolding.
CARRYCOT
UNFOLDING THE CARRYCOT
44. Unfold bars of the carrycot (1) until it is locked in plastic holders (2).
45. Fix the insert of the carrycot with a zipper (1) and next, place the mattress inside
thecarrycot.
46. ADJUSTMENT OF THE CANOPY IN THE CARRYCOT
Press the buttons on both sides of the adjusting mechanism of the carrycot canopy at
thesame time (1) and adjust it to the required position (2).
47. To additionally enlarge the canopy, unzip the zipper (1), simultaneously press
thebuttons on both sides of the adjusting mechanism of the carrycot canopy (2) and adjust
itto the required position (3).
48. FOOTMUFF IN THE CARRYCOT
Fix the footmuff with a zipper.
VENTILATION OF THE CARRYCOT CANOPY
49. To have access to the ventilation system of the canopy, unzip the zipper in the
backpart (1) and move the fabric (2).
50. Ventilation in the carrycotUnzip the zipper of the ventilation located on the outer side of
the carrycot. (1)Unzip the zipper of the carrycot padding. Detach the collar of the
carrycot.(2)Zip the zipper of the carrycot padding(3)To cover the ventilation, proceed in
reverse order.
MOSQUITO NET FOR THE CARRYCOT
51. Unzip the zipper below the carrycot canopy (1) and take the mosquito net off. Insertthe
mosquito net on the carrycot (2) and attach it with pins to the carrycot (3)
ASSEMBLY AND DISASSEMBLY OF THE CARRYCOT
NOTE: Adapters of the carrycot can only be used to assemble the carrycot on the stroller.
52. To fix the adapters of the carrycot on the pram's frame, insert them in the
lockingmechanism of the stroller (1). To disassemble the carrycot adapters, press the
button (2)and take the adapter of the frame (3).
NOTE: Never assemble or disassemble the carrycot unit with the child inside it.
53. To assemble the carrycot, position it so that the canopy is in the front part of the
frameand insert it in the previously assembled adapters of the carrycot.
NOTE: Make sure the carrycot is properly assembled in the frame of the stroller.
54. Slide the end of the bassinet bracket on the chassis bracket, until you hear a
distinctclick sound
55. To disassemble the carrycot, press the button below the carrycot (1) and at the
sametime take the carrycot of the frame (2). Disassemble the carrycot adapters from
thestroller.
To Next Page
Loading...
