8
Preparation Before Use
1. To connect the hose, insert the hose connector into
the hose connection opening until you hear a “click”
sound.
2. Connect the telescopic tube to the handgrip of the
hose.
3. Extend the telescopic tube to a length you nd
most comfortable by pushing the button forward.
The button is on the telescopic tube. Connect a
nozzle / brush suitable for the oor type to be
cleaned.
4. The hard oor brush can be used with the brush
lowered (
for carpet) or raised ( for hard
oor) . You may also connect the nozzle to vacuum
corners, slots or grooves (not included).
C700VC18_IB_RC_190826_grace.indd 8 26/8/2019 2:56 PM
To Next Page
Loading...