Essentielb CT702 User Manual

38
39
EN
Description of the transmitter base
11
13
14
12
17
16
15
11
11 On/Off switch
12 Charging pins
13
Headset battery charge indicator light (lights up red when
the battery is charging, then turns green when the headset
battery is charged)
14 Pairing button
15 3.5mm jack socket
16 Optical input (S/PDIF)
17 5V power connector
(micro USB port)
charging the headset
You can charge the headset battery with or without the charging
base.
With the charging base
Low battery:
flashing red base
indicator light
Charging:
steady red base
indicator light
Accessories not included.
2~3 hrs
*
*
*
Charging complete:
steady green base
indicator light
1. Connect one end of the micro USB cable supplied to the USB
port of the charging base.
2. Plug the other end into a free USB port on your computer.
You can also use a USB mains charger (not provided).
3. Place the wireless headset on the connector of the charging
base. The indicator lights on the headset and the base will
light up red.
4. When the headset is fully charged, the indicator light on the
base will turn green. You can then remove the headset from
the base and start using it.

Essentielb CT702 Specifications

General

Brand	Essentielb
Model	CT702
Category	Headsets
Language	English