38
V.1.0
notes for using the mouse
EM-10-SF
notes for using the mouse
• The mouse can be used on most surfaces.
• Avoid clear, glossy, or intricately patterned
surfaces. Non-reflective, opaque surfaces
without repetitive patterns work best.
• Avoid using the mouse on a metal surface.
Metals, such as iron, aluminum or copper,
shield the radio frequency transmission
and may slow down the mouse sonsor’s
response time or cause the mouse to fail
temporarily.
• To maximize battery life, it is recommended
you use the mouse on a white or light color
surface.
• If you do not use the mouse, switch it off.
dpi switch
The mouse supports 1000 dpi, 1600 dpi,
2400 dpi. Press the DPI button to switch the
settings. The default setting is 1600 dpi.
To Next Page
Loading...
Need help?
General