Estalky E550 - Basic Operations and Connectivity Setup; Device Power On;Off; Navigating the Display Interface; WiFi Network Connection

BASIC OPERATIONS
Startup
Press the on / o buon for 3 seconds. Once the screen lights up, a Startup
message will appear, indicang that it is turned on correctly.
Shutdown
Press the on / o buon for 3 seconds. Once the screen turns o it will indicate
that the terminal is completely turned o.
INTERACT WITH THE DISPLAY with the channel knob
One click: Illuminate the screen / enter a menu / select an opon
Long press: return to the previous menu.
Double click: when you are connecng to a WiFi and entering the password it goes
to lowercase.
Rotate right or le: Up or down menu opon.
WiFi connecon
Go to Sengs> WiFi. Acvate the WiFi opon (one click to change the status).
Turn to nd the WiFi network you want to connect to. Click on the desired net-
work and then enter the password for that network. Click to write in upper case
and double click to lower case. Turn the knob to select the desired character. Click
on a to conrm / exit the password entry.
GPS locaon
Go to Sengs> Locaon. Click to enable / disable the GPS locaon.
Date and me conguraon
Go to Sengs> Date & Time. Click to congure the me display format.
Conexión Bluetooth
Go to Sengs> Bluetooth. Rotate to select PTT Buon. Click to acvate the
Bluetooth connecon. Aer scanning rotate and search for the device name. Click
to conrm the link to the Bluetooth buon. On other Bluetooth devices select
Headset with the same operaon.