To Next PageTo Next PageWhy does the actual position not display or change during programming on Estun Control Systems?
If the system's actual position does not display or change during programming, check whether the encoder wiring is correct and ensure the encoder cable is well connected.
How to troubleshoot if the motor of Estun Control Systems can't switch from high speed to low speed?
If the motor can’t switch from high speed to low speed, check whether the high-low speed signal has been sent or the motor power is too small. Also, check whether the parameter of distance conversion is correct.
What to do if Estun Control Systems device will not display when powered on?
If the device does not display when powered on, it may be due to an incorrect connection of the power supply terminal electrode. Refer to the power nameplate for correct connection information. The voltage may also be too low, or the electrical outlet may not be connected.
General| Model | E21S |
|---|---|
| Input Voltage | 220V AC |
| Output Voltage | 24V DC |
| Display | LCD |
| Number of Axes | 2 |
| Backgauge Control | Yes |
| Angle Control | Yes |
| Stroke Control | Yes |
| Ram Control | Yes |
| Workpiece Counter | Yes |
