eta Freezy User Manual (English)

Questions and Answers:

C
chungbillyAug 14, 2025
How to fix an eta Air Conditioner that won't switch on?
- K
  Kara EdwardsAug 14, 2025
  If your eta Air Conditioner won't switch on, there might be a few reasons. First, ensure it's properly connected to the mains. If it is connected, the supply cord or plug might be damaged, or the fuse could be faulty. In such cases, it is necessary to check/ repair the appliance by an authorized service center. Also, check the remote controller's battery and replace it if discharged. Lastly, if a fuse has been activated, wait about 5 minutes before trying to switch the appliance on again. If the problem persists, it is necessary to check/ repair the appliance by an authorized service center.
N
Nathan LittleAug 17, 2025
Why is my eta Freezy not cooling properly?
- T
  Tammy SandersAug 18, 2025
  If your eta Air Conditioner isn't cooling in Cooling mode, several factors could be the cause. It could be that the room temperature is already lower than the set temperature, which is normal; the appliance will restart when the room warms up. The anti-freeze function might be active, and the appliance will restart upon completion. Check if windows or doors are open and close them. Ensure no other heat-producing devices are active nearby and switch them off. Also, a clogged air filter or blocked air supply line can hinder cooling, so clean the filter and unblock the air supply.
K
kelly94Aug 21, 2025
What to do if my eta Air Conditioner shows error message E4?
- E
  Eric HallAug 21, 2025
  If your eta Air Conditioner displays the error message 'E4', it means the condensate container is full. Drain the water from the container. However, if the message appears frequently even when the container isn't full, contact the service center for assistance.
G
Gary ReeseAug 25, 2025
Why does my eta Freezy keep turning off by itself?
- S
  Sergio HaleyAug 25, 2025
  If your eta Air Conditioner switches off automatically, it might be due to the timer being set or the desired temperature being reached. To resolve this, switch the appliance back on or, if necessary, set new temperature or timer values.
O
Oscar LeeAug 27, 2025
Why does my eta Freezy only work for a short period?
- C
  Cindy BryantAug 28, 2025
  If your eta Air Conditioner only works for a short time, it could be because the set temperature is too close to the room temperature. Try lowering the set temperature. Another possibility is that the air output is blocked. In this case, remove any obstacles that may be blocking the airflow.
A
Ashley GriffinAug 31, 2025
What to do if water leaks when moving my eta Freezy?
- S
  Sandra LopezAug 31, 2025
  If water escapes from your eta Air Conditioner when you move it, the container for condensate might be full. Drain the condensate from the container. Also, ensure the appliance is placed on a flat surface to prevent spillage.
R
Rodney SnyderSep 3, 2025
What does error E2 mean on my eta Freezy Air Conditioner?
- J
  Justin MartinezSep 3, 2025
  If your eta Air Conditioner displays the error message 'E2', it indicates that the room temperature sensor has failed or is damaged. If repair is necessary, please contact automatized service.
S
Scott RiveraSep 6, 2025
What does error code E3 mean on an eta Air Conditioner?
- C
  Carrie AdamsSep 6, 2025
  If your eta Air Conditioner displays the error message 'E3', it means that the sensor of the vaporizer pipeline has failed or is damaged. If repair is necessary, please contact automatized service.
C
chavezmatthewSep 10, 2025
What does error E5 mean on my eta Freezy Air Conditioner unit?
- S
  samuelswansonSep 10, 2025
  If your eta Air Conditioner displays the error message 'E5', it indicates that the condensate sensor has failed or is damaged. If repair is necessary, please contact automatized service.