eta Fresco 0578 User Manual (English)

Questions and Answers:

V
Veronica WiseAug 3, 2025
What to do if my eta Air Conditioner won't switch on?
- M
  Megan BrownAug 3, 2025
  If your eta Air Conditioner won't turn on, there are several potential causes. First, ensure the appliance is properly connected to the mains. If the battery in the remote controller is discharged, replace it. If a fuse has been activated, wait about 5 minutes before attempting to switch the appliance on again. For issues like a damaged supply cord, plug, or fuse, or for wrong connection, it is necessary to check/ repair the appliance by an authorized service center.
A
Andrew MartinezAug 8, 2025
Why does my eta Air Conditioner not cool in Cooling mode?
- M
  Martin MorrisAug 8, 2025
  If your eta Air Conditioner isn't cooling in Cooling mode, several factors could be at play. The room temperature might be lower than the set temperature, in which case the appliance will resume cooling once the room warms up. The anti-freeze function might be active; the appliance will restart when it's complete. Check if windows or doors are open, and close them. Ensure no other heat-producing devices are running nearby. Also, a clogged air filter or blocked air supply line can cause this issue; clean the filter and unblock the air supply.
M
Michael MooreAug 13, 2025
What to do if my eta Air Conditioner switches off automatically?
- R
  Rachel McconnellAug 13, 2025
  If your eta Air Conditioner switches off automatically, it might be due to the timer being set or because the adjusted temperature has been reached. Try switching the appliance on again, and if needed, set new temperature or timer values.
R
Richard HarrisAug 18, 2025
What to do if my eta Air Conditioner displays error message E4?
- E
  Eric DonaldsonAug 18, 2025
  If your eta Air Conditioner shows the error message 'E4', it indicates that the container for condensate is full. Drain the water from the container. If the message appears frequently even when the container isn't full, contact the service center.
T
Thomas FitzgeraldAug 23, 2025
Why does my eta Air Conditioner only work for a short time?
- A
  Amanda BooneAug 23, 2025
  If your eta Air Conditioner operates only briefly, it could be because the set temperature is close to the room temperature; try lowering the set temperature. Another reason might be that the air output is blocked; remove any obstacles obstructing the airflow.
T
Taylor MartinezAug 28, 2025
What to do if water escapes from my eta Air Conditioner when I move it?
- K
  Kevin EdwardsAug 29, 2025
  If water leaks from your eta Air Conditioner during movement, the condensate container is likely full; drain it. Also, ensure the appliance is placed on a level surface.