eta NOVEL - User Manual

Questions and Answers

W
William SanchezJul 28, 2025
Why is the suction output not sufficient on my eta NOVEL Vacuum Cleaner?
- J
  John GrantJul 28, 2025
  If your eta Vacuum Cleaner isn't sucking up dirt effectively, there are several things to check: * First, make sure the suction regulation isn't set to the MIN position; adjust it to MAX. * Ensure there are no open suction holes on the hose handle; close any openings. * A full dust filter can also reduce suction, so replace the filter if it's full. * Clogged micro-filters can restrict airflow; replace them. * Finally, check for any blockages in the nozzle, suction hose, or tube and remove any objects that are obstructing them.
R
ronaldjenningsAug 4, 2025
What to do if the motor of my eta NOVEL won't start?
- A
  Andrea MyersAug 5, 2025
  If the motor of your eta Vacuum Cleaner won't start, check these potential causes: * Ensure that the power supply is properly connected by checking the cord, the plug, and the socket. * Verify that the power button is switched on; if not, push the button to turn it on.
N
Nina ComptonAug 12, 2025
How to fix the cable if it cannot be wound in the entire length in my eta NOVEL Vacuum Cleaner?
- A
  Anne ChaneyAug 12, 2025
  If the cable of your eta Vacuum Cleaner cannot be wound in the entire length, it might be twisted. Straighten the cable, pull out about 50 cm, and then push the button again.
D
Deanna DominguezAug 19, 2025
What to do if the lid of my eta NOVEL cannot be closed because the safety lock is activated?
- J
  Johnathan GayAug 19, 2025
  If the lid of your eta Vacuum Cleaner won't close due to the safety lock being activated: * Check the dust filter to make sure it is correctly inserted in the holder or adapter. Repair the fastening of the cardboard front if needed. * Also, verify that the holder is correctly inserted in the suction space of the vacuum cleaner. Repair the insertion if necessary.