Need help?Do you have a question about the eta T2-BTI and is the answer not in the manual?
General| Brand | eta |
|---|---|
| Model | T2-BTI |
| Category | Control Panel |
| Language | English |
Details on safety signals (DANGER!, CAUTION!, WARNING!) and symbol explanations for safe operation.
Explains the wizard process: adding function blocks, setting connections, terminal assignments, and rebooting.
Procedure to access and initiate the system configuration assistant.
Visual guide to function blocks and screen for establishing connections between system components.
Process of assigning terminals to components and installing the final configuration.
How to change access levels and use manual mode for testing outputs like pumps and mixers.
Operating the mixing valve and changing terminal assignments for heating circuit components.
Steps for saving system configurations to a USB stick or the control system and restoring them.
Detailed settings for the [BufferFlex] function block, covering various boiler types and system configurations.
Parameters for configuring the [Hot water tank] function block, including temperature, circulation, and solar integration.
Configuration settings for [Heating circuit] function blocks, covering basic and advanced parameters, including room sensor integration.
Parameters for controlling the solar heating system, including pump speed, collector temperature, and differential settings.
Settings for pool temperature control, frost protection, and water treatment functions.
Configuration parameters for auxiliary boilers, managing operation, output, and priority.
Settings for the changeover valve to manage heat source switching based on criteria and priority.
Parameters for integrating external heat sources, controlling diverter valves and pump operations.
Configuration for managing external heat demand, including temperature targets, frost protection, and output control.
Settings for heating pipelines, including mix valve runtime, temperature warnings, frost protection, and auxiliary boiler interaction.
Configuration for M-bus meters, focusing on serial number entry and read-out interval for data logging.
To Next Page
