Need help?Do you have a question about the Etac Molift Air 200 and is the answer not in the manual?
Molift AIR is a strong and smooth ceiling lift for comfortable and safe patient transfers.
Product complies with regulation (EU) 2017/745 as a medical device, risk class I.
Only trained personnel may use the equipment. Rail system must be installed by certified personnel.
Recommends using only Molift components. Etac is not responsible for warranty if modifications are made.
Only certified personnel can service or repair hoist. Risk of injury from moving parts and electric shock.
Two-year warranty against defects in workmanship and materials, one-year for batteries.
The product label barcode contains article number, serial number, and production date.
Detailed explanations of symbols used on the product for user understanding and safety.
Specifies maximum load capacity (SWL) and unit weight details.
Details available battery types and charger specifications.
Provides unit dimensions, hoisting ranges for models, and minimum clearance.
Indicates the expected operational lifetime of the hoist in cycles and years.
Steps for installing the trolley into the rail system, including end stops.
Procedure for attaching the lifter to the trolley, noting it requires no tools.
Checklist to verify proper installation and safe operation before use.
Use appropriate accessories, adhere to duty cycle, and follow specific safety warnings.
Daily inspection of lifter, rail, connections, and functions by caregiver.
Details on hand control buttons, indicator light, and safe charging practices.
Procedure for using the electrical emergency lowering function via the hand control.
Step-by-step guide for correctly aligning and securing the sling bar.
How to activate and reset the emergency stop button on the hoist.
Procedure for manual emergency lowering using tools, exclusively for service personnel.
Recommendations for storing and transporting the lifter, including temperature range.
Guidelines for operating the lifter at standard room temperatures and humidity levels, including EMC precautions.
Details on battery types (SLA, LiFePO4), their life expectancy, and charging advice.
Explanation of indicator lights on chargers and power supplies.
Interpretation of the battery level indicator lights on the hoist.
Meaning of service indicator lights and periodic inspection requirements.
How to charge the hand control using a power outlet and compatible chargers.
Explanation of the In Rail Charging system for continuous charging via the rail.
Plan lifting operations for safety and smoothness, considering ergonomics and risks.
Ensure correct sling fitting, strap security, and prior manual review.
Recommendation to use only Etac or Molift slings due to safety and liability.
How the angle sensor prevents lifting if the strap angle is too steep.
Maintain eye contact and ensure clear space around the client during lifting.
The 4-point sling bar must be positioned across the client to prevent sliding.
List of available charger cords and plug adapters for different regions.
Details on available aluminum sling bars (2-point and 4-point) with sizes and part numbers.
Information on the Molift Scale Set, its compatibility, and features like BMI calculation.
Overview of Molift RgoSling series, sizes, materials, and combination compatibility.
Used for transferring users between different rail systems, e.g., between rooms.
Procedure for safely disconnecting the transition coupling unit.
Procedure for safely connecting the transition coupling units to link rails.
Verify that both gates are visible and the locking bolt is not visible when disconnected.
Ensure coupling is locked securely; rails should not separate by hand.
Clean regularly with a damp cloth and pH-neutral detergent. Avoid solvents.
Use isopropyl alcohol for disinfection. Check emergency stop after cleaning.
Details materials used and potential for rare allergic reactions in clients.
If lifter poses a safety risk, take it out of service, mark 'out of order', and report.
Annual inspection by authorized personnel. Report findings and take unit out of service if defects are found.
Check Emergency Stop activation, overheating, or hand control connection/damage.
Verify lifting strap angle sensor activation and adjust strap angle.
If lifting band is out of wind or wrongly wound, use manual lowering and send for service.
General| Lifting Capacity | 200 kg |
|---|---|
| Safe Working Load | 200 kg |
| Power Source | Battery |
| Emergency Stop | Yes |
| Emergency Lowering | Yes |
| Warranty | 2 years |
| Material | Aluminum |
| Lifting Speed | 30 mm/s |
To Next Page
