ES583.1 - User's Guide 7
ETAS General
1.2 RoHS conformity
1.2.1 European Union
The EU guideline 2002/95/EU limits the use of certain dangerous materials for
electric and electronic devices (RoHS conformity).
ETAS confirms that the product meets this directive applicable in the European
Union.
1.2.2 China
With the China RoHS identification attached to the product or its packaging,
ETAS confirms that the product meets the guidelines of the "China RoHS" (Man
-
agement Methods for Controlling Pollution Caused by Electronic Information
Products Regulation) applicable in the People's Republic of China.
1.3 CE marking
With the CE marking attached to the product or its packaging, ETAS confirms
that the product corresponds to the product-specific, applicable European Direc
-
tives. The CE Declaration of Conformity for the product is available upon request.
1.4 Product return and recycling
The European Union (EU) released the Directive for Waste Electrical and Elec-
tronic Equipment - WEEE to ensure the setup of systems for collecting, treating
and recycling electronic waste in all countries of the EU.
This ensures that the devices are recycled in a resource-friendly way that does not
represent any risk to personal health and the environment.
Fig. 1-1 WEEE symbol
The WEEE symbol (see Fig. 1-1 on page 7) on the product or its packaging iden-
tifies that the product may not be disposed of together with the remaining trash.
The user is obligated to separately collect old devices and provide them to the
WEEE return system for recycling.
The WEEE Directive applies to all ETAS devices, but not to external cables or bat-
teries.
Additional information about the recycling program of ETAS GmbH is available
from the ETAS sales and service locations (see chapter
8 on page 37).
To Next Page
Loading...