3
INTRODUCTION
Dear Customer
We thank you for choosing this product and recommend you read this manual carefully before
starting installing the dosing pump. Please abide by the technical indications and safety rules herein
specified.
ETATRON D.S. is not responsible for any damage or injury due to
incorrect or improper use of the product.
TECHNICAL SUPPORT AND MAINTENANCE
The companies authorised to provide technical support and maintenance to pumps within the
European Union and worldwide are not listed.
For more detailed information, call our headquarters on the following number:
Sales Office Ph. +39 06 93 49 891
▲ATTENTION!
Installing the dosing pump in an environment with fumes and high
humidity is not recommended as the alum alloy reducer body and
motor, even though they have a finish coat, may be affected, unlike the
head made of stainless steel or plastic, which ensures full compability.
Therefore we highly recommend installing the dosing pump in a well
protected and ventilated environment.
TECHNICAL DATA AND CHARACTERISTICS CAN BE CHANGED WITHOUT NOTICE
To Next Page
Loading...
