Need help?Do you have a question about the ETC ColorSource 20 and is the answer not in the manual?
General| Brand | ETC |
|---|---|
| Model | ColorSource 20 |
| Category | Music Mixer |
| Language | English |
Explains the process of assigning channels to DMX addresses and device types.
Guides on patching single-address dimmer devices.
Details patching complex multi-parameter lighting devices using personalities.
Explains the Remote Device Management protocol for lighting control.
Defines channels as controls for dimmers or fixtures.
Methods for controlling channel intensity using faders, touchscreen, or keypad.
Using the numeric keypad for classic lighting control of channels and levels.
Interface for selecting colors for lights with color mixing systems.
Controlling specific parameters of automated lights like position, beam, etc.
Overview of the interface for recording and editing lighting looks.
How playbacks are used to store and control lighting looks.
Procedure for recording a single lighting look into a playback memory.
Procedure for recording the current state into a cue.
Specifies which channels, parameters, or media to include in a recording.
How to save the current lighting levels into a cue or sequence step.
How to edit cue names, timing, and content.
How to record current channel states into the live cue.
Procedure for recording sequences with steps, fade, and timing.
How to edit the content, names, and timing of sequence steps.
How to update a specific step within a sequence.
How to control sequence playback and step-by-step operation.
How to revert the most recent changes made to the show data.
Introduction to applying dynamic patterns to channels.
Step-by-step guide to applying effects to lights.
How to apply color effects to lights with color mixing capabilities.
How to apply motion (shape) effects to lights with pan/tilt movement.
How to apply intensity effects to lights.
How to apply effects to specific parameters of chosen channels.
Procedure for adding new effects to lights.
How to remove an effect from a light or playback.
Functions for removing levels from cues, playbacks, and channels.
Removes all levels from all sources.
Sets all lighting levels to zero.
Controls for independent outputs and devices.
Interface for viewing and operating playbacks and sequences.
Legal responsibilities and compliance for using media.
Overview of audio and video playback and recording capabilities.
Controls for selecting and playing audio clips and operating the mixer.
Details on audio input levels, source selection, media playback, mute, and volume.
Controls for playing still images or Video Toy patterns.
Overview of the Amigo Web Browser Interface for remote control.
Steps to connect the Amigo browser using a WiFi network.
Steps to connect the Amigo browser using a wired network.
Contains core console setup functions like Patch, Settings, and Files.
Access to internal settings organized into tabs.
Configures console network settings, protocols, IP, OSC, and Amigo.
Details OSC protocol for remote communication and console control.
Operations for managing show files: new, open, save, save as.
Saving and opening shows, including default show templates.
How to save the current show file.
How to save the current show file with a new name.
How to update the console's main operating software.
To Next Page
