Need help?Do you have a question about the ETC ColorSource 40 and is the answer not in the manual?
General| Brand | ETC |
|---|---|
| Model | ColorSource 40 |
| Category | Music Mixer |
| Language | English |
Procedure to safely turn off the console and put it into hibernation mode.
Displays a topographical map of channels for control.
Describes touch, gesture, and button interactions with the console interface.
Sets faders to control individual channels or playbacks.
Provides manual control over fades between cues.
Four faders used to control output of specific functions like volume or playbacks.
Associates channels with DMX addresses and device types for control.
Procedure for patching single-address devices like dimmers.
Procedure for patching multiple-address lighting devices.
Explains RDM as a two-way communication method for lighting control.
Defines channels as controls for fixtures, dimmers, or groups.
Configures the console for Simple or Complete operating modes.
Overview of console functions for controlling lights and cues.
Provides channel and level control via numeric keypad entry.
Screen for selecting mixable colors using a color picker or chips.
Controllable features of automated lights like position and beam.
Procedure to record a lighting look into a playback memory.
Records the current console state into a cue in the cue list.
Editor for modifying cue names, timing, and content.
Procedure to record sequences with fade and step timing.
Reverts the most recent action that changed show data.
Overview of the effect system for dynamic patterns on channels.
Step-by-step guide to applying color, shape, intensity, or parameter effects.
Applies color effects to channels with color mixing capabilities.
Applies motion (pan/tilt) effects to chosen channels.
Applies intensity effects to channels with intensity control.
Procedure to add a new effect to selected lights.
Removes levels from cues, playbacks, and channels.
Sets all lighting levels to zero instantly.
Display for controlling and viewing playbacks and sequences.
Plays only the intensity part of a recorded look.
Plays only the parameter part of a recorded look.
Toggles all parameters on or off for playback control.
Controls for playing and recording audio clips and managing the audio mixer.
Controls for playing and recording video clips and image effects.
Mutes all audio output from the console.
Blanks the video output on the console to black.
Lists OSC commands for remote console control via network.
Overview of using the web browser interface for console control.
Steps to connect to the console using a WiFi network.
Steps to connect to the console using a wired network connection.
Configures operating mode, language, and stage map zones.
Sets default fade times for clear, cue, and parameter moves.
Configures DMX speed, backlight, buttons, and external monitor.
Configures network settings, output protocols, and OSC.
Operations for erasing show data, memories, sequences, cues, and patch.
Starts a new show file, clearing existing memory.
Saves the current show file with its existing name.
Imports an existing show file from a memory stick.
Exports the current show file to a memory stick.
Updates the console's main operating software.
To Next Page
