To Next PageTo Next Page
Need help?Do you have a question about the ETC ColorSource ThruPower Series and is the answer not in the manual?
General| Brand | ETC |
|---|---|
| Model | ColorSource ThruPower Series |
| Category | Control Unit |
| Language | English |
Explains how the document uses specific conventions for clarity.
Details the features and specifications of the 12-circuit ThruPower.
Details the features and specifications of the 24-circuit ThruPower.
Lists the common features applicable to all models.
Lists available models, part numbers, and dimensions.
Specifies the supply voltage and current requirements.
Describes the internal power supply and control mechanisms.
Lists available kits for enhancing functionality or installation.
Overview of the device's display, LEDs, and keypad.
Explains how to navigate menus using the keypad.
Details the LCD screen's capabilities and adjustments.
Guides through initial power-up, language, and ThruPower settings.
Describes the information shown on the main Home screen.
Outlines the main categories within the Settings menu.
Settings for DMX mode, start address, patching, and loss behavior.
Settings for output parameters including dimmer, relay, TPAuto, and curves.
Configuration for emergency input and relay threshold.
Management of backlight, language, and factory defaults.
Displays current software and hardware version details.
How to access and use the test menu for dimmers.
Guides on setting dimmer levels in groups or individually for testing.
Procedure for safely exiting the test menu.
Procedures for cleaning vents and the interior of the device.
Lists parts that can be replaced in the field and their procurement.
Steps to troubleshoot when loads receive no output.
Steps to troubleshoot issues with dimming functionality.
Steps to troubleshoot when outputs do not turn off.
