Need help?Do you have a question about the ETC EchoTouch and is the answer not in the manual?
General| Category | Control Unit |
|---|---|
| Ethernet Ports | 1 |
| Network Protocols | sACN, Art-Net |
| Communication | Ethernet |
| DMX Ports | XLR 5-pin |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
Provides contact details and information for obtaining technical assistance from ETC support.
Instructions on how to register your ETC device to receive software updates and advisories.
Information on how to join and participate in the ETC User Forum for community support and tips.
Explains what zones are, their types, and how they are used for fixture control.
Describes how to select zones on the Zone Map for making changes to their values.
Details the Zone Map display and how to use it for zone selection and control.
Lists and describes the available controls for interacting with the Zone Map and zones.
Explains the function of the wheel control for adjusting zone levels.
Describes the function of the Clear Selection command to deselect zones.
Explains the Lockout button functionality for controlling other Echo devices.
Describes pages as user-configurable displays for buttons, faders, and sequences.
Instructions on how to add new pages and label or rename them.
Describes the process of deleting a currently selected page.
Details how to enter and use Layout Mode for customizing the display and pages.
Explains how to add items like faders, presets, or buttons to a page.
Guides on modifying existing item properties and removing items from a page.
Introduces the Patch screen for assigning zones and DMX addresses to fixtures.
Describes how to patch single-address dimmers and Echo Zones using EchoConnect.
Step-by-step guide for patching Echo Zones with different types like Intensity or Color.
Details the process of patching single-address dimmers and other simple devices.
Explains how to duplicate a patched cell to place it elsewhere on the Zone Map.
Describes how to patch complex devices with multiple parameters using personalities.
Step-by-step guide for patching multi-address devices using personalities.
Explains the RDM protocol and its use in patching and device discovery.
Describes the Identify function for locating RDM-capable devices during patching.
Explains how to load custom fixture profiles for unsupported devices.
Describes how to view DMX addresses or the topographical Zone Map in the Patch screen.
Explains how to reverse pan and tilt directions and swap pan/tilt functions.
Explains how to remove a zone from the patch list.
Provides a detailed explanation of the RDM protocol and its capabilities.
Defines parameters as controllable features of an automated light, excluding intensity.
Shows all available parameters for a selected light.
Details how to control position parameters like pan and tilt.
Explains the Nudge function for fine-tuning position and color parameters.
Describes how to control color mixing parameters for lights using the color picker.
Covers control of beam parameters like iris, focus, and gobos.
Details how to use the color picker in whites mode for shade selection.
Explains how to program color chips with custom color mixes.
Describes how to execute lamp commands like strike or douse for fixtures.
Explains how to send fixtures to their home positions.
Details how to send specific parameter groups to their home positions.
Explains the Record button for capturing presets and sequences.
Defines presets as collections of zone values for playback.
Details how to re-record an existing preset.
Explains multi-space presets for controlling presets in multiple locations.
Step-by-step guide for creating multi-space presets.
Describes the Off button's function to set outputs to 0% level and home parameters.
Lists the main functions available within the device's setup menu.
Explains where internal settings are stored and how they are arranged.
Covers language, hardware model, software, and protocol versions.
Allows adjustment of DMX speed and touchscreen backlight.
Provides options for configuring the device's network settings.
Contains Echo-specific settings like Echo Space, passcode, and lockout control.
Allows configuration of inactivity time and behavior for the touchscreen.
Sets default timing for Presets and Off functions.
Lists all filing operations like creating, saving, and opening show files.
Details operations specific to show files, including saving defaults and deleting.
Covers advanced file management tasks like importing settings and updating firmware.
Explains how to start a new show file and open an existing one.
Details how to save the current show file and export it to a memory stick.
Describes how to delete an existing show file from the device.
Saves the current show as the default or removes the default show.
Describes how to import a settings file.
Explains how to update the device's main operating software.
Details how to install extra data files like personalities or languages.
Explains how to export device log files to a USB drive.
Guides on installing language packs from a USB drive.
To Next Page
