Showfile Management 37
When the Export button is pressed, the following screen will display. Press Yes to export. If you want to leave
this display without exporting, press No.
File, Delete
Delete an existing show file off your device by going to Setup>Files>Shows>Delete.
When the Delete button is pressed, the following screen will display showing the available show files. Select
the desired file, and then press Accept. If you want to leave this display without deleting, press Cancel.
Files, Show files
You can open and save shows by going to Setup>Files
Pressing the Showfiles button gives you the default show options.
Functions
Save As Default
Remove Default Show
Delete
Import
Export
Caution: All data is stored internally in non-volatile memory. Do not switch off the power until any
pending save operation is completed, or you may lose data. It is strongly advised that you make peri-
odic backups of important data to an external memory stick using the export function.
To Next Page
Loading...
Need help?
General
