ETC EchoTouch - Recording Your Looks For Playback; Recording Presets and Sequences; Understanding Presets; Re-recording Existing Presets

Recording Your Looks For Playback 25
Recording Your Looks For Playback
This section covers the multiple ways that you can record lighting looks for playing back. You can record pre-
sets and sequences.
Record
Press this button to record a preset or a sequence.
You can choose to hide the Record button in Setup>Settings>Echo.
Presets
Presets are a collections of all zones in a space set to defined values. Only one preset can be played back at a
time. Presets can be played back from the EchoTouch itself or from additional Echo devices connected via
EchoConnect.
There are 64 presets available on EchoTouch.
Presets default to the following values:
Preset Level Preset Level
1 100% 9 100%
2 75% 10 75%
3 50% 11 50%
4 25% 12 25%
5 100% 13 100%
6 75% 14 75%
7 50% 15 50%
8 25% 16 25%
The default time for each preset can be set it in Presets tab in Settings. See Settings: Presets for more inform-
ation.
Use the Edit Item button to change the label and timing associated with a preset button.
Re-recording Presets
Note: A preset button assigned to the preset number must be available on a page before a preset
can be re-recorded.
To re-record a preset:
1. Create the look that you would like to record.
2. Press Record.
3. Press the appropriate preset button. The button will flash as the new preset is being stored.
Multi Space Presets
Multi Space presets allow you to control a preset of the same number in a different space or allow a preset to
be played in multiple spaces from one button.
For Example, a preset button with multi space configured could play preset 1 in spaces 1, 3, and 5. While
triggered together, each preset uses the values defined for its space.
Creating a Multi Space Preset:
To create a multi space preset, you must first be in layout mode.
1. While on the appropriate page with your preset, go to Setup>Layout Mode.