ETC Setup Guide
Eos Rackmount Devices
Corporate Headquarters nMiddleton, WI, USA | +1 608 831 4116
Global Offices nLondon, UK | Rome, IT | Holzkirchen, DE | Paris, FR | Hong Kong | Dubai, UAE | Singapore
New York, NY | Orlando, FL | Los Angeles, CA | Austin, TX
Web etcconnect.com | Support support.etcconnect.com | Contact etcconnect.com/contactETC
© 2022 Electronic Theatre Controls, Inc. | Trademark and patent info: etcconnect.com/ip
Product information and specifications subject to change. ETCintends this document to be provided in its entirety.
4250M2240 Rev A Released 2022-07
This guide outlines the installation and setup of the Eos Family rackmount devices:
Eos Apex Processor
Eos Remote Interface
Ion Xe Remote Processor Unit
For information on using the Eos Family software, please refer to the Eos Family Operations Manual.
ETC manuals can be downloaded free of charge from ETC’s website at etcconnect.com.
Rack Mounting
All Eos Family rackmount devices ship with the hardware necessary to mount the associated device
into a 19" rack enclosure with 2Uof rack space. Both the front and rear mounting brackets are
required for a stable rack mounting installation.
The following 2U metric rack mount kits are also available separately:
Apex Processor and Eos Remote Interface Rack Mount Kit (ETCPart Number 4450A2040)
Ion Xe RPURack Mount Kit (ETCPart Number 4311A2003)
Mounting Hardware
1. Front left bracket
2. Front right bracket
3. Rear left bracket
4. Rear right bracket
5. Rail adapter (2)
6. M5 x 12mm screws (8)
7. 10-32 x 1/2 screws (8)
8. 6-32 x 1/4 screws (8)
9. 6-32 x 3/8 screws (4)
10. Optional spring clips (8)
You will also need a Phillips screwdriver.
To Next Page
Need help?
General
