To Next PageTo Next Page
Need help?Do you have a question about the Etdoor ET-600E and is the answer not in the manual?
General| Max. Force | 600N |
|---|---|
| Motor Type | DC Motor |
| Lifting Capacity | Up to 100kg |
| Installation Type | Ceiling Mount |
| Control Type | Remote Control |
| Remote Control Range | 30m |
| Safety Features | Obstacle detection |
Emphasizes reading and adhering to all safety and installation guidelines.
Details safe operation, child supervision, and avoiding moving parts.
Advises on proper waste disposal and cord replacement for safety.
Details soft start/stop, force learning, overload detection, safety resistance, interfaces, and auto-close.
Covers photo beam, rolling code transmitter, backup battery, keypad, metal plate, O/S/C button, and fuse.
Lists functions available as custom orders for specific customer needs.
Provides sequential instructions for installing the aluminum track opener system.
Lists essential components for the aluminum track installation setup.
Details the procedure for assembling the chain shuttle for the track.
Describes attaching motor brackets, connecting the opener to the frame/ceiling.
Details ceiling fixing methods, required gaps, and secure mounting.
Warns against fixing the opener to plasterboard and highlights risks of improper mounting.
Outlines the steps for installing the steel track for the door opener.
Provides important notes on track alignment, ceiling connection firmness, and power supply.
Illustrates initial assembly steps for the sectional steel track using diagrams.
Continues the assembly illustration for the sectional steel track with Fig. 3.
Shows further assembly steps for the sectional steel track via Figs. 4 and 5.
Details how to assemble rail sections and install the chain with its components.
Explains the process of assembling the header sleeve, including carriage screw and spring.
Directs users to the steel track installation section for further steps.
Stresses following specific safety rules for electrical installations and automatic doors.
Advises on checking the environment, door condition, and understanding instructions before installation.
Recommends installing safety devices like photo beams and following manual instructions meticulously.
Guides on setting travel limits and the automatic force learning process for opener operation.
Explains the procedure to pair the transmitter with the receiver unit.
Details how to adjust the safety reverse force sensitivity for the door opener.
Describes how to enable/disable transmitter lock and configure auto-close timing.
Explains photo beam function setup and the use of the O/S/C terminal.
Details adding O/S/C buttons and the auto safety reverse function for enhanced safety.
Explains the flash light function and its wiring requirements for different voltage lights.
Describes the pass door protection feature ensuring the door only opens when the pass door is closed.
Shows the connection diagram for various terminals on the opener.
Displays the layout and components of the opener's printed circuit boards.
Lists all included accessories for the aluminum track installation.
Lists all included accessories for the steel track installation.
Lists all included accessories for the sectional steel track installation.
Explains how to manually disengage the shuttle to move the door by hand.
Details regular checks for door balance, working parts, and safety devices.
Provides instructions and safety notices for replacing the opener's light bulb.
Lists key technical data including power input, motor, temperature, and force ratings.
Provides guidance for installers and information to convey to the end-user regarding maintenance.
Advises users on safe operation, keeping children away, and contacting professionals for repairs.
