To Next PageTo Next Page
Need help?Do you have a question about the Etdoor ET-800E and is the answer not in the manual?
Read manual carefully before installation and use. Installation by qualified persons only.
Adherence to safety and installation recommendations by qualified personnel for safe opener operation.
Proper disposal of electrical waste and safety regarding damaged power cords.
Key instructions for users regarding safe operation, child safety, and manual release.
Details on soft start, force learning, overload detection, safety resistance, and connectivity.
Includes rolling code, backup battery, keypad, auto-closing, and external fuse.
Introduction to optional features like caution light, pass door protection, and auto safety reverse.
Ensuring door suitability, balance, and proper electrical socket installation.
Identifying key components for aluminum track installation and assembling the chain shuttle.
Detailed steps for attaching motor brackets and securing the opener to the ceiling or frame.
Warning regarding secure ceiling mounting to prevent opener falling and property damage.
Steps for fixing track brackets, steel track, and attaching the opener via U hanging bracket.
Securing the opener to the ceiling and connecting panel brackets and clutch cord.
Checking manual door movement and connecting the opener to a properly earthed power supply.
Instructions for assembling rail sections with grease and threading the chain through components.
Steps for inserting the chain into the rail and assembling the header sleeve with spring compression.
Directs users to refer to the steel track installation section for other processes.
Following safety standards, checking surroundings, and verifying electrical supply for safe installation.
Analyzing risks, ensuring door condition, installing safety devices like photo beams, and emergency stops.
Following manual instructions and seeking technical department clarification for doubts.
Setting the upper and lower travel limits and allowing the opener to learn opening and closing forces.
Procedure for matching the remote transmitter to the opener's receiver for control.
Adjusting the force sensitivity for the safety reverse mechanism to prevent entrapment.
Configuring transmitter lock and auto-close timer for operational control.
Enabling photo beam safety and connecting O/S/C terminal for manual control.
Adding O/S/C buttons and enabling auto safety reverse for enhanced control and safety.
Configuring the flash light function and pass door protection for operational safety.
Checking door balance, working parts, and safety device functionality periodically.
Steps for safely replacing the opener's light bulb, ensuring correct voltage and power.
General| Max. Force | 800N |
|---|---|
| Radio Frequency | 433.92MHz |
| Motor Type | DC Motor |
| Input Voltage | 220V AC |
| Speed | 10cm/s |
| Frequency | 50Hz |
| Safety Features | Auto-reverse, Obstacle detection |
| Remote Control | Yes |
| Remote Control Range | 30m |
| Manual Operation | Yes |
| Installation Type | Ceiling Mount |
