Etdoor ET-1000E - User Manual

Sectional and Tilting Door Opener
Installation Instructions and User Guide
ET-600E
ET-800E
ET-1000E
S/N
WARNING
Please read the manual carefully before installation and use. The installation of your
new door opener must be carried out by a technically qualified or licensed person.
Attempting to install or repair the door opener without suitable technical qualification
may result in severe personal injury, death and / or property damage.

Summary

Important Safety Recommendations

Installer Responsibilities and Qualifications

Emphasizes installer's duty to follow regulations and qualifications for safe installation.

Safe Operation and System Limitations

Covers safe door operation, obstruction system, user restrictions, and system limitations.

Maintenance and Disposal Guidelines

Details cord replacement, proper disposal of electrical waste, and general safety advice.

Basic Function Introduction

Special Function Introduction

Installation (Aluminum Track)

Installation (Steel Track)

Installation (Sectional Steel Track)

Installation Recommendations

Basic Function Setting and Applying

Travel Limit Setting and Force Self-Learning

Guides users through setting travel limits and the opener's force self-learning process.

Receiver and Transmitter Matching

Explains the procedure for pairing the remote transmitter with the opener's receiver.

Safety Reverse Force Adjustment

Details how to adjust the safety reverse force sensitivity for the door opener.

Advanced Function Settings

Transmitter Lock Function

Describes how to activate or deactivate the transmitter lock feature for security.

Auto-Close Time Setting

Covers setting the automatic closing time for the garage door opener.

Photo Beam Setting

Explains how to configure the photo beam safety feature for the opener.

O;S;C Terminal Connection

Details the connection of an O/S/C (Open/Stop/Close) switch to the terminal.

Special Function Introduction and Application

O;S;C Interface and Pass Door Protection

Explains adding O/S/C buttons and the pass door safety feature.

Auto Safety Reverse Function

Details the auto safety reverse function for enhanced collision protection.

Flash Light Function

Describes the connection and usage of the flash light feature with the opener.

PCB Structure

Manual Disengagement

Maintenance

Logic Circuit Board and Door Checks

Covers maintenance of the logic board and regular checks for door balance and operation.

Light Bulb Replacement

Provides instructions and precautions for replacing the unit's light bulb.

Technical Specifications

Final Notes

Important Information for the User

Etdoor ET-1000E Specifications

General

Brand	Etdoor
Model	ET-1000E
Category	Garage Door Opener
Language	English