Etec E580TM User Manual

Tilting LCD/Plasma Flat Panel
Wall Mount
Installation Guide
• Supports most 36” - 63” LCD/Plasma Flat Panels
• Maximum weight capacity: 176 lbs.
• Supports VESA Sizes up to 700X500
This product is intended only to mount a television of the indicated size and weight.
Using this product to mount televisions heavier than the maximum weight capacity can
damage equipment and cause personal injury.
READ THIS FIRST
Read this entire manual! Do not attempt to install this product if you do not understand the
instructions. Contact a qualied mount installer if you have any doubts about a safe and
secure mount installation, or if you are not sure what specic wall materials you are at-
taching this mount to. Check all the parts carefully to make sure there are no missing
or damaged parts. Improper installation may result in damage to your TV, property, and
personal injury.
• Easy installation
• Low prole
• Built-in level for easy positioning
• Safety bolts lock the TV on the mount
• Easy to adjust tilt angles:
-5 to 15 degrees
Model: E580TM

Etec E580TM Specifications

General

Brand	Etec
Model	E580TM
Category	Racks & Stands
Language	English

Summary

Read This First Safety Instructions

Important Installation Preparations

Emphasizes reading the entire manual, checking parts, and contacting a professional if unsure about installation.

Safety and Tools

Child Safety Guidelines

Provides critical safety advice regarding child interaction with the mounted TV and mount.

Required Tools for Installation

Lists essential tools needed for a proper and safe installation of the TV wall mount.

Step 1: Attach Brackets to TV

Bracket Attachment Procedures

Details on attaching left and right brackets to the TV, including bolt selection and alignment.

Step 2: Install Cable Cover

Cable Management

Instructions for routing cables and securing the cable cover onto the mount.

Step 3: Attach Wall Mount

Determine Mounting Height

Guidance on finding the optimal viewing height for the television on the wall.

Mounting on Wood Stud Walls

Procedure for securely attaching the mount to wood stud walls with specific drill bits and bolts.

Mounting on Masonry Walls

Instructions for installing the mount onto concrete, brick, or stone walls using anchors.

Step 4: Hang Television Display

Securing TV to Wall Mount

Steps for safely lifting and hanging the TV onto the wall mount and locking it in place.

Step 5: Adjust Tilt Angle

Viewing Angle Adjustment

Guidance on how to adjust the tilt angle of the mounted television for optimal viewing.

Mount Reference Dimensions

Key dimensions and specifications for the wall mount's adjustable bracket spacing and frame.

Limited Six-Year Mount Warranty