To Next Page
P
Patrick GonzalesJul 27, 2025
What to do if ETEKCITY Remote Control outlet is unresponsive?
- SsbryantJul 27, 2025
If your ETEKCITY Remote Control outlet isn't responding, try these steps: * Replace the remote batteries with new 12V (23A) batteries, as low battery power can reduce the wireless range. * Ensure the outlet and connected device are properly connected and powered on. * Confirm the outlet has proper air circulation to prevent overheating. * Check that the maximum load current doesn't exceed 10A (~1200W); if it does, immediately unplug the device.
General
