4
1• YOUR SAFETY AND THAT OF OTHERS
Never remove the fuel cap whilst the engine is running or hot.
- If fuel is spilt, do not start the engine: remove the mower from
the affected area and take care not to ignite any undispersed fuel
vapour.
• Ensure that the fuel tank and fuel can caps are replaced correctly.
• Never store, or use petrol near a fl ame or near devices such as
stoves, water-heaters with pilot lights or any other device liable to
produce sparks.
• These recommandations are also available for the ride-on brush
cutter.
• WARNING: NEVER ALLOW THE ENGINE TO RUN IN
CONFINED AREAS. Exhaust gas contain carbon monoxide, which
is odourless and can kill.
• Let cool the engine before you park the ride-on brush cutter.
• Do not start the engine if you can smell petrol, or in the presence of
other explosion risks.
• Do not run the engine without a silencer.
• Clean regulary the exhaust, the engine, the battery compartment,
and the periphery of the fuel tank in order to avoid accumulation of
fl a mmable materials (grass, leaves, grease excess, etc).
• These precautions are vital to your safety. However, the
recommendations given are not exhaustive and due care should
always be exercised when using your ride-on brush cutter.
• You should also comply with any legal requirements relating to
ride-on brush cutter (e.g. insurance, useful life, etc).
• The ride on brush cutter is not designed to tow a charge.
• The under pressure hydraulic oil is dangerous because it can, when
it is a microjet (leak), penetrate the skin and lead to serious injury.
A medical assistance is immediately needed.
To Next Page
Loading...
