How to transport Etesia SKD Lawn Mower?
To transport your Etesia Lawn Mower, it is recommended to use a loading ramp when loading or unloading it from a trailer or utility vehicle. After loading, apply the parking brake, place chocks under the wheels, and close the petrol tap. Secure the lawn mower with straps run through the coupling hook and the slot.
How to tow Etesia SKD Lawn Mower?
To tow the Etesia ride-on brush-cutter, set the hydrostatic axle by-pass to the [O] position. Use only a tow bar attached to the towing hook at the front. Towing should be done over short distances and at low speeds (less than 5 km/h). Remember to return the hydrostatic axle by-pass to the operating position [I] after towing. For longer distances, use a suitable means of transport.
What to do if I need to move Etesia SKD Lawn Mower with the engine off?
To move the Etesia ride-on brush-cutter with the engine off, set the hydrostatic axle by-pass control to the [O] position. The by-pass control lever is accessible under the chassis at the back of your ride-on brush-cutter. After moving, remember to put the hydrostatic axle by-pass back in the operating position [I].
How to change wheels on Etesia SKD Lawn Mower?
To change the wheels on your Etesia lawn mower, follow these steps: 1. Stop the engine and remove the ignition key. 2. Apply the parking brake and immobilize the machine using chocks under the wheels. 3. Place a jack under the chassis and lift the mower. 4. Secure the machine on stable screw jacks. 5. Remove protection covers and pull out locking clips. 6. For assembly, reverse the order, cleaning and greasing the wheel shafts. Check tyre pressures to 1.2 kg/cm2. Or: 1. Stop the engine and remove the ignition key. 2. Apply the parking brake and use chocks. 3. Loosen the wheel studs. 4. Jack up the mower. 5. Secure on screw jacks. 6. Remove studs and wheel, reassemble in reverse, tightening screws to 50 Nm. Check tyre pressures to 0.8 kg/cm2. If unsure, contact your ETESIA de...
Essential safety instructions for operating the ride-on brush-cutter and protecting yourself and others.
Details on how to locate and identify your specific ride-on brush-cutter model number.
Essential warnings and precautions for safe operation, including fuel handling and environmental hazards.
Explanation of various labels and symbols used on the machine and in the manual for safety guidance.
Detailed explanation of safety-related diagrams, including safety labels, accumulator markings, and warning symbols.
Identification and function of controls for machine movement, engine speed, and transmission by-pass.
Explanation of controls for adjusting cutting height, operating lights, and starting the engine.
Instructions for engaging the cutting system, using the parking brake, and engaging the differential lock.
Identification and location of engine, fuel tank, oil sump, and hydraulic fluid expansion chamber.
Identification of chassis parts, seat adjustment mechanisms, and steering column controls.
Detailed description of various control levers for advance, cutting height, parking brake, and differential lock.
Description of the ignition key switch and the light switch functions.
List of original spare parts and information regarding the ETESIA guarantee for purchased products.
Detailed technical data for the engine and the ride-on brush-cutter, including dimensions and weight.
Specifications for noise levels at the driver's seat and vibration values for the whole body and upper limbs.
Steps for preparing the machine, starting the engine, and engaging safety systems before operation.
Guidelines for safely fueling the machine, including precautions against fire and spills.
Instructions for adjusting the seat position, suspension firmness, and steering column tilt for optimal comfort.
Procedures for safely starting and stopping the engine, including checks before turning on.
Guidelines for driving the machine, including using the parking brake, manual advance lever, and differential lock.
How to adjust cutting height and best practices for mowing different types of grass.
Information on using the machine's lights, hour meter, and coupling hook for towing.
Procedures for accessing key components like the engine, fuse box, and cutting deck for maintenance or inspection.
Routine cleaning procedures for the machine and its cutting system, including specific instructions for mulching housing.
Guidance on checking and changing engine oil and oil filters, with specific steps for oil level checks.
Instructions for maintaining the engine's cooling system, ensuring proper airflow and fin cleanliness.
Maintenance procedures for the hydrostatic axle and checking the hydraulic fluid level.
Recommendations for maintaining correct tyre pressures for optimal machine performance and safety.
Steps to prepare the machine for prolonged storage, especially during winter.
Steps for bringing the machine back into service after a period of storage.
Guidance on resolving common problems like fuse replacement, moving the machine, towing, and changing wheels.
List and brief description of optional accessories available for the ride-on brush-cutter.
Definitions of terms and general conditions applicable to the ETESIA warranty.
Details of the contractual warranty period, coverage, and procedures for claiming warranty service.
General| Brand | Etesia |
|---|---|
| Model | SKD |
| Category | Lawn Mower |
| Language | English |
To Next Page
