Etesia SKD - 2. Key to Diagrams - Safety; Understanding Labels and Symbols; Safety Diagrams and Markings

5
• LABELS
• Various labels have been affixed to your ride-on brush-cutter.
• Check that they are all present (see list below and pictures).
• Labels with a yellow background warn against risks.
• The other labels contain instructions for operating the ride-on brush-
cutter.
This symbol appears in the instruction manual alongside
those sections which deal with user safety.
This symbol appears in the instruction manual alongside
important information on how to prolong the life of your
ride-on brush-cutter.
• ENGINE DIAGRAMS
Fuel is highly explosive and inammable.
Stop the engine before ll the fuel tank. DO NOT SMOKE.
Always ll the fuel tank in the open and never pour or use
petrol near a naked ame or near devices such as stoves,
water-heaters with pilots lights or any other device able to
produce sparks.
Exhaust fumes are very toxic and contain carbon monoxide
who is a deadly and odorless poison. Do not run the engine
in conned areas.
To avoid any burn, do not touch the exhaust pipe when
it is hot.
SAFETY LABELS (PAGE 6)
• a = IDENTIFICATION PLATE
• b = OBLIGATORY HEAR PROTECTION
MARKING OF ACCUMULATORS
• c = Indicates these are hazardous products which should preferably
be returned to the distributor.
• d = (Pb) indicates the presence of lead.
• e = Indicates the year of entry into service on the machine.
DIAGRAMS RECTANGLE A
• f = CAUTION !
• g = Before using, please read and follow the safety and maintenance
instructions of the instruction booklet.
• h = Stop the engine, remove the ignition key and disconnect the spark
plug before proceeding.
• i = Risk of projections.
• j = Avoid the presence of third persons in the danger zone.
• k = Fall down risk. Never transport passengers.
• l = Hold the third persons far from the machine.
• m = Risk of toppling over the machine.
• n = Never use your ride-on brush-cutter on slopes with a gradient of
more than 30% (17°).
DIAGRAMS RECTANGLE B
• o = Risk of cut feet and hands.
• p = Hold the third persons far from the machine.
• q = Risk of objects projection and cut feet.
• r = Never mow without the retracting parts of the cutting enclosure
in place.
2• KEY TO DIAGRAMS
- SAFETY