22
Care and Maintenance
For a safer use and a longer lifetime of the ES-K1A, we recommend you to follow the
instructions listed below.
Usage notices
General instructions
- This keypad must be registered in the control panel of your eTIGER alarm system before
being used for the rst time.
- The power supply of this keypad may impact the transmission distance of the wireless
signal.
- This keypad is powered by 3 x AAA batteries.
- This keypad is compatible with eTIGER Secual alarm systems.
- Remove the battery strip before using for the rst time.
- To avoid disturbing your neighborhood, do not press the [SOS] key unless necessary.
- Check your keypad on a regular basis to make sure the system works properly in case of
emergency.
- This keypad is neither waterproof nor moisture-proof. Install it in a shady, cool and dry
place.
- The case of this keypad is made of ABS plastic. Please keep it away from strong light to
ensure longer lifetime.
Limitations
- This keypad is not explosion proof. Keep it away from re and ame sources.
- Install this keypad away from objects that produce heat or electromagnetic elds such as
heaters, air conditioners, microwave ovens, etc.
Recycling instructions
- Dispose of the keypad according to local regulations.
- Do not dismantle the product if you are not a professional technician.
To Next Page
Loading...