EasyManua.ls Logo

ETNA AK2102DA - Installation

ETNA AK2102DA
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN 7
WARNING! Keep ventilation openings, in the appliance
enclosure or in the built-in structure, clear of obstruction.
Do not use mechanical devices or other means to accelerate
the defrosting process, other than those recommended by
the manufacturer.
WARNING! Do not damage the refrigerant circuit.
WARNING! Do not use electrical appliances inside the food
storage compartments of the appliance, unless they are of
the type recommended by the manufacturer.
WARNING! Do not use water spray and steam to clean the
appliance.
WARNING! Clean the appliance with a moist soft cloth.
Only use neutral detergents. Do not use abrasive products,
abrasive cleaning pads, solvents or metal objects.
WARNING! Do not store explosive substances such as
aerosol cans with a flammable propellant in this appliance.
WARNING! If the supply cord is damaged, it must be
replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
Installation
WARNING! Only a qualified person must install this
appliance.
• Remove all the packaging.
• Do not install or use a damaged appliance.
• Obey the installation instruction supplied with the appliance.
Always be careful when you move the appliance because it
is heavy. Always wear safety gloves.
• Make sure the air can circulate around the appliance.
Wait at least 4 hours before connecting the appliance to
the power supply. This is to allow the oil to flow back in the
compressor.
Do not install the appliance close to radiators or cookers,
oven or hobs.
SAFETY

Related product manuals