EasyManua.ls Logo

ETNA CM650Ti/E01 - Preheating

ETNA CM650Ti/E01
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN 19
OPERATION
Preheating
The preheating function can be activated after you have chosen one of
the following functions:
Mode Preheating
Microwave functions
Microwave
7
Oven functions
Hot air
3
Grill with Hot air
3
Hot air + Bottom heat
3
Grill
7
Combi microwave
functions
Microwave + Hot air
3
Microwave + Grill with fan
3
Microwave + Bottom heat +
Hot air
3
Microwave + Grill
7
The preheating function only works if you have already chosen one
of the modes above. During preheating, the microwave function is
switched off.
You can adjust the other settings before or after choosing the
preheating function
1. Touch the quick preheat key.
The preheat icon appears in the display.
2. Touch the start / pause key to start the preheating.
If the right temperature is reached, a signal sounds.
You can stop the preheating by opening the oven door or by
touching the Off key.
3. Touch the start / pause key to start the previously set cooking
process.
If you do not touch the start / pause key, the combi microwave oven
switches itself Off automatically after 15 minutes.

Related product manuals