EN 24
Gas connection
• We recommend that the hob be connected by means of a fixed pipe.
Connection using a specially-designed safety hose is also permitted.
• The pipe behind the oven must be made entirely out of metal.
Note!
• A safety hose may not be bent and must not come into contact
with moving parts of kitchen units.
• The connection tap for the appliance must always be positioned
such that it is easily accessible.
• The type of gas and the country for which the appliance has been
designed are shown on the appliance identification card.
Before using the appliance for the first time, check the connections
using water and washing-up liquid to ensure that there are no gas
leaks!
Electrical connection
230–240 V~ - 50/60Hz
• The wall plug socket and plug should always be accessible.
• Make sure that the cable does not come into contact with parts of
the oven that may become hot.
• If you want to make a fixed connection, make sure that an omnipolar
switch with a contact separation of at least 3 mm is fitted in the
supply cable.
• The appliance should not be connected to the mains via a multi-
plug adapter or extension cable, as the safe use of the equipment
cannot be guaranteed.
INSTALLATION
To Next Page
Loading...
