EN 26
Please note!
After installation of the device, check whether the burners work properly.
The flame pattern should be regular and stable on the high setting, and
the burners must not go out on low.
Technical data
The data plate on the underside of the appliance indicates the total
nominal load, the required voltage and the frequency.
This appliance meets all relevant CE guidelines.
Connection 230V - 50Hz
Power output 2.84kW
External dimensions (mm)
Width 600
Height 850-950
Depth 590/1000 with door open
Gas information
Burner Gas Operating
pressure mbar
Normal (1.65 kW) G25/G25.3 25
High (2.8 kW) G25/G25.3 25
Simmer (1 kW) G25/G25.3 25
Wok (4 kW) G25/G25.3 25
INSTALLATION
To Next Page
Loading...
