ETNA KVV128ZIL/E02 - Mounting Extra Foot

EN 15
INSTALLATION AND CONNECTION
Mounting extra foot
The extra foot prevents the appliance from tipping forward when:
• the refrigerator is empty, and
• the door is loaded to its maximum (15 kg), and
• the door is opened about 90 degrees.
Install the extra foot as follows:
1. Tip the appliance and locate the screw
hole at the left side of the bottom.
2. Place the screw in the screw hole of the
extra foot.
3. Attach the extra foot using a Phillips-head
screwdriver (not included).
1
2 3