ETNA VWV649WIT - Water Softener and Salt Management

EN 7
USING YOUR DISHWASHER
Indicators
5 Warning
indicator
Rinse aid
If this indicator is lit, it means the dishwasher is low on dishwasher
rinse aid and requires a refill.
Salt
If this indicator is lit, it means the dishwasher is low on dishwasher
salt and needs to be refilled.
6 Cycle
indicator
1 2 4 53
6
Washing
If this indicator is lit, it means the dishwasher is washing.
1 2 4 53
6
Drying
If this indicator is lit, it means the dishwasher is drying.
1 2 4 53
6
End
If this indicator is lit, it means the dishwasher is ready.
Water softener
• The hardness of the water varies from place to place. If hard water is used in the
dishwasher, deposits will form on the dishes and utensils.
• The appliance is equipped with a special softener that uses a salt container specifically
designed to eliminate lime and minerals from the water.
Water hardness table
Adjust the salt consumption according to the table below:
Water hardness
ºClarke ºdH mmol/l Setting Corresponding
program indicator
Salt consumption
(grams/cycle)
0 - 6 0 - 5 0 - 0.94 H1 Soak 0
7 - 14 6 - 11 1.0 - 2.0 H2 Rapid 9
15 - 21 12 - 17 2.1 - 3.0 H3 Soak + Rapid 12
22 - 28 18 - 22 3.1 - 4.0 H4 Eco 20
29 - 42 23 - 34 4.1 - 6.0 H5 Eco + Soak 30
43 - 69 35 - 55 6.1 - 9.8 H6 Eco + Rapid 60
The factory setting: H3 (EN 50242)
Contact your local water board for information on the hardness of your water supply.