EasyManua.ls Logo

Etrel INCH DUO - INTENDED USE AND OPERATION SAFETY; INTENDED USE; OPERATIONAL SAFETY ADVICE; INSTALLATION AND MAINTENANCE GUIDELINES

Etrel INCH DUO
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2 | 10
INTENDED USE
Etrel INCH DUO charging station is intended only
for charging of electric vehicles and should not be
used to charge other appliances or for any other
purpose.
The manufacturer accepts no responsibility for
damage or injuries resulting from incorrect
installation or inappropriate use.
INSTALLATIO N AN D MAI NT ENANCE
Do not install charging station near flammable,
explosive, or combustive materials.
Charging station installation must be performed in
dry weather conditions.
Electrical installation, wiring, and connections
must be carried out by qualified electrician or
technician in accordance with all local electrical
codes, legislation, and ordinances.
Warning! Before installing and wiring the
charging station, make sure that the power
supply is disconnected: remove fuses or
deactivate the circuit breaker to protect from
unintentional powering of the device.
Charging station can be installed, maintained, and
repaired by qualified personnel only.
Charging station’s power supply should always be
switched off during the maintenance and repair.
Avoid hazardous risks. Only the manufacturer, an
authorized service technician, or technically
qualified personnel may replace damaged charging
station or its components.
OP ERA TION
Do not operate your charging station if there is
visible damage to the unit or charging cable. Call
manufacturer’s or reseller’s support department
for advice how to proceed.
Do not put fingers into the charging connector.

Other manuals for Etrel INCH DUO

Related product manuals