Need help?Do you have a question about the Etrel INCH LITE and is the answer not in the manual?
Details the charging station's purpose, operation, and general usage guidelines.
Details requirements for maintenance and repair by qualified personnel.
Instructions for handling operational issues and reporting them to the operator.
Explains engineering principles and safety features incorporated into the product design.
Recommendations for fire prevention and steps to take in case of a fire incident.
Steps to take in case of a fire involving the charging station.
Discusses compliance with environmental directives and material selection.
Guidance on the proper disposal and recycling of the product according to WEEE directive.
Comprehensive analysis of potential dangers and corresponding protective measures.
Describes the core features and smart capabilities of the charging station.
Lists additional components and accessories available for the charging station.
Details the items included in the product package.
Explains the initial power-on sequence and status light indications.
Guides through the initial charging process and setup.
Instructions to verify functionality and configure the maximum charging current.
Procedures for checking and testing overcurrent, surge, and RCD protection elements annually.
Instructions on how to access the maintenance doors for troubleshooting.
Steps to perform a basic or factory reset of the charging station.
General| Model | INCH Lite |
|---|---|
| Rated Output Power | Up to 22 kW |
| Output Power | Up to 22 kW |
| Input Current | Up to 32 A |
| Output Current | Up to 32 A |
| Operating Temperature | -30 °C to +50 °C |
| IP Rating | IP54 |
| Ingress Protection | IP54 |
| Charging Standard | IEC 61851-1 |
| Connector Type | Type 2 |
| Input Voltage | 400 V AC |
| Output Voltage | 400 V AC |
| Protection | Overcurrent, Overvoltage, Short Circuit |
| Communication | Ethernet |
To Next Page
