6
6. OPERATING INSTRUCTIONS
7. MAINTENANCE AND CARE
8. NOTES REGARDING ENVIRONMENTAL PROTECTION
9. CONTACT
On/O /selection of the operating mode
Cleaning
Charging with the 230 V charger:
Charging on a 12 V vehicle outlet:
Fixture:
Pressing the switch rotates through the various modes in the following
order:
Clean the cordless workshop lamp using a slightly moist, soft cloth and
a mild cleaning agent. Ensure that no cleaning agents or liquids enter
the device. Do not use aggressive cleaning agents, solvents, petrol, etc.
1. Connect the charging cable to the cordless workshop lamp
(charging socket on the rear of the lamp).
2. Connect the charging cable to the charger.
3. Plug the charger into a 230 V socket.
During the charging process, the indicator lamp illuminates red; if the
workshop lamp is fully charged, the indicator lamp turns green.
Separate the devices in reverse order after charging.
1. Connect the charging cable to the cordless workshop lamp
(charging socket on the rear of the lamp).
2. Connect the charging cable to the vehicle charging adapter.
3. Connect the vehicle charging adapter to a 12/24 V vehicle socket.
During the charging process, the indicator lamp illuminates red; if the
workshop lamp is fully charged, the indicator lamp turns green.
Separate the devices in reverse order after charging.
The cordless workshop lamp is equipped with a folding hook in order to
enable you to work with your hands free. The lamp has a magnetic foot
and a magnetic bracket on the rear as additional xture option.
Workshop lamp (at 100%) Workshop lamp (at 50%)
Torch OFF
EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Germany
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
info@eal-vertrieb.com
www.eal-vertrieb.com
In doing so, ensure that the battery of your vehicle is not
completely discharged.
Do not push or pull the magnetic base over sensitive
surfaces that can be damaged as a result.
Storage
Store the cordless workshop lamp in a dry place. Do not expose the
lamp to moisture, oil, dust, dirt, high temperatures, strong vibrations, or
mechanical load.
Charge the cordless workshop lamp fully before you store the cordless
workshop lamp for a longer period of non-use.
Do not dispose of electrical devices with the house-
hold waste! Electronic and electrical devices must be
collected separately and sent for environmentally
friendly recycling. Please contact your community or
city administration regarding disposal options for
electrical and electronic scrap.
Information about battery law
Here, Cd stands for cadmium, Hg for mercury and Pb for lead.
Cd Hg Pb
The battery cannot be removed. Dispose of the entire
device.
In connection with the sale of batteries and accumulators
and of devices that contain batteries and accumulators, we
would remind you of the following as stipulated in § 18 of
the German Battery Act (BattG):
Batteries and accumulators may not be disposed of in
the household waste system. As an end consumer you
are obliged under law to return spent batteries and
accumulators. You can return the batteries and
accumulators free of charge to a communal collection point,
retail outlets or directly to us (address in section 9).
Old batteries may contain pollutants or heavy metals that
could damage the environment or cause physical harm.
Batteries can be recycled because they contain important
raw materials such as iron, zinc, manganese or nickel.
Batteries and accumulators that contain pollutants are
marked with the symbol of a crossed-out waste bin and the
chemical name of the pollutant.
To Next Page
Loading...