09 10
Charging eufyCam
eufyCam does not come fully charged. It is recommended that you fully
charge eufyCam before mounting it to your desired spot.
To charge the camera, use the provided micro-USB charging cable to connect
eufyCam to the camera charging port on the backside of the HomeBase. The
camera LED indicator will blink white while charging. Charging a camera from
0% to 100% takes approximately 4 hours; it will take longer if you charge the
camera via a universal 5V USB charger.
Mounting the Camera Outdoors
You can mount eufyCam to your selected outdoor location once you have
successfully added it to your list of devices in the eufy Security app.
1. Here are some things to consider when looking for a good spot to mount
your eufyCam:
a. Mount your camera in a spot that has a clear view of what you want to
surveil.
b. Use the “Mounting Guide” function, found at the end of the setup
process or under Camera Settings > Mounting Guide, to test the
wireless signal strength of eufyCam at the location you wish to mount
the camera. Make sure the location has a strong wireless signal
strength so that your camera stays connected to the HomeBase. Move
the camera as close to the HomeBase as possible if the wireless signal
strength is weak.
c. Hang eufyCam between the recommended mounting height of 7-10
ft (2-3 m) above the ground. This height gives eufyCam a wide field-
of-view and maximizes the detection range of the motion sensor of
eufyCam.
To Next Page
Loading...
Need help?
General