eufy Security Indoor Cam E220 - Safety; Notice

English 1211 English
SAFETY
• Due to the used enclosure material, the product shall only
be connected to a USB Interface of version 2.0 or higher.
• The adapter shall be installed near the equipment and
shall be easily accessible.
• Do not use the Device in the environment at too high or
too low temperatures, never expose the Device under
strong sunshine or too wet environment.
• The suitable temperature for T8410C and accessories is
0°C to 40°C.
• When charging, please place the device in an
environment that has a normal room temperature and
good ventilation.
• It is recommended to charge the device in an
environment with a temperature that ranges from 5°C
to 25°C.
• Please ensure to use only the charger oered by the
manufacturer. Using unauthorized charger may cause
danger and violate the authorization of the device and
the guarantee article.
• This charger is for indoor use only. The charger type is
TEKA-UCA10EU, output voltage/current is 5Vdc/1A. The
plug is considered as disconnect device of adapter.
• For pluggable equipment, the socket outlet should be
easily accessible.
NOTICE
This product complies with the radio interference
requirements of the European Community.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this device is in
compliance with the essential requirements and other relevant
provisions of Directive 2014/53/EU. For the declaration of
conformity, visit the Web site: https://uk.eufylife.com/
Hereby, Anker Innovations Limited declares that this device is in
compliance with The Product Security and Telecommunications
Infrastructure (Security Requirements for Relevant Connectable
Products) Regulations 2023. For the Statement of Compliance,
visit the website https://www.eufy.com/uk/psti-related.
This product can be used across EU member states.
Use of the Works with Apple badge means that an
accessory has been designed to work specifically with the
technology identified in the badge and has been certified
by the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or
its compliance with safety and regulatory standards.