Install the Light String
You will need a ladder and make sure it is stable enough or use it with the help of another person. Use the extension
cable if needed.
1. Clean the surface with a cloth or tissue and wait until the surface is completely dry before installing.
• Dust residue may aect the adhesion of 3M adhesive.
2. For the best wall-washing eect, the light string should be installed 2-4 inches (5-10 cm) away from the
wall surface. Use the provided positioning card for measurement.
3. Remove the protective lm from each light.
4. Peel the VHB adhesive from the back of each light, then rmly press the light against the surface for at
Install the Light String
You will need a ladder and make sure it is stable enough or use it with the help of another person. Use the extension
cable if needed.
1. Clean the surface with a cloth or tissue and wait until the surface is completely dry before installing.
• Dust residue may aect the adhesion of 3M adhesive.
2. For the best wall-washing eect, the light string should be installed 2-4 inches (5-10 cm) away from the
wall surface. Use the provided positioning card for measurement.
3. Remove the protective lm from each light.
4. Peel the VHB adhesive from the back of each light, then rmly press the light against the surface for at
Install the Light String
You will need a ladder and make sure it is stable enough or use it with the help of another person. Use the extension
cable if needed.
1. Clean the surface with a cloth or tissue and wait until the surface is completely dry before installing.
• Dust residue may aect the adhesion of 3M adhesive.
2. For the best wall-washing eect, the light string should be installed 2-4 inches (5-10 cm) away from the
wall surface. Use the provided positioning card for measurement.
3. Remove the protective lm from each light.
4. Peel the VHB adhesive from the back of each light, then rmly press the light against the surface for at
Install the Light String
You will need a ladder and make sure it is stable enough or use it with the help of another person. Use the extension
cable if needed.
1. Clean the surface with a cloth or tissue and wait until the surface is completely dry before installing.
• Dust residue may aect the adhesion of 3M adhesive.
2. For the best wall-washing eect, the light string should be installed 2-4 inches (5-10 cm) away from the
wall surface. Use the provided positioning card for measurement.
3. Remove the protective lm from each light.
4. Peel the VHB adhesive from the back of each light, then rmly press the light against the surface for at
Install the Light String
You will need a ladder and make sure it is stable enough or use it with the help of another person. Use the extension
cable if needed.
1. Clean the surface with a cloth or tissue and wait until the surface is completely dry before installing.
• Dust residue may aect the adhesion of 3M adhesive.
2. For the best wall-washing eect, the light string should be installed 2-4 inches (5-10 cm) away from the
wall surface. Use the provided positioning card for measurement.
3. Remove the protective lm from each light.
4. Peel the VHB adhesive from the back of each light, then rmly press the light against the surface for at
Install the Light String
You will need a ladder and make sure it is stable enough or use it with the help of another person. Use the extension
cable if needed.
1. Clean the surface with a cloth or tissue and wait until the surface is completely dry before installing.
• Dust residue may aect the adhesion of 3M adhesive.
2. For the best wall-washing eect, the light string should be installed 2-4 inches (5-10 cm) away from the
wall surface. Use the provided positioning card for measurement.
3. Remove the protective lm from each light.
4. Peel the VHB adhesive from the back of each light, then rmly press the light against the surface for at
Install
the Light String
-j- You will need
a
ladder and make sure it is stable enough or use it with the help of another person. Use the extension
cable if needed.
To Next Page
Loading...