Working Temperature
Product Set: -20
℃
to 45
℃
(-4
℉
to 113
℉
)
Light Strings: -20
℃
to 60
℃
(-4
℉
to 140
℉
)
Troubleshooting
1. Light doesn't glow at all / Some light do not glow.
• If only the rst string glows while the power adapter is plugged in, unplug the power adapter and
plug it in again.
• If some lights don't glow, disconnect all components, then reconnect all components and plug the
power adapter in again.
• If any of the selected light eect are not fully displayed, contact eufy support team for further analysis
or product replacement.
2. Cannot connect to Wi-Fi.
• The 5GHz network is not supported. Please set the router to 2.4GHz and then reset it.
• Do not skip the Wi-Fi connection steps in the app.
• Make sure you have entered the correct Wi-Fi name and password.
• Connect the hotspot of your phone to the product.
3. Adhesive stickers don't stick.
• Clean the surface with a cloth and make sure there is no residue.
• Remove the original sticker and replace it with the replacement stickers.
• Make sure to press against the surface for at least 5 seconds when installing the light.
• Use a cable clip and screws for reinforcement.
Troubleshooting
To Next Page
Loading...