At a Glance
1
3
2
4
13.4ft (4.1m) 12.1ft (3.7m)
①
Power Adapter
②
Control Unit (Power Button)
• Press to turn on or o.
• Press and hold for 2 seconds to reset.
③
Light Strip
④
Waterproof Cap
Testing the Lights
• Connect the light strips with the adapter unplugged. Avoid connecting while the
adapter is plugged. If you connect the light strips while adapter is plugged, the strips
may not light up.
• A maximum of 9 light strips can be connected to the power adapter.
1. Connect all light strips together, then connect them to the control box and power adapter.
Secure the waterproof caps for each connection and the end of the last light strip.
• Make sure the pin connections on the interface are correct.
• Avoid using brute force to prevent damage to the product.
To Next Page
Loading...
