2. Plug in the power supply to verify that each light strip is working properly.
• If some of the light strips do not light up, unplug and reconnect the power adapter. Make
sure the light strips are working properly before proceeding to the next step.
• See "Troubleshooting" for other lighting problems that may occur.
Setting up the System
1. Download and install the eufy Life app, then sign in or create an account.
• Make sure that the eufy Life app is version 2.11.0 or later to support this light strip.
2. Follow the in-app instructions to add this device and complete the setup.
Installing your Outdoor Light
Install the light strips beneath the eaves to generate a wall-washing eect.
The installation will take approximately 1-2 hours and may vary depending on the home type.
To Next Page
Loading...
