EUFY SoloCam S340 - Select a Solar Panel Location; Option 1: Mount the Camera and the Solar Panel Separately

To ensure that no detection is missed, do not install the camera directly facing the monitoring area. Instead, maintain an angle to avoid any potential blind
spots.
Select a Solar Panel Location
Option 1: Mount the Camera and the Solar Panel Separately (Best for Strong Solar Power)
If the camera is blocked, install the solar panel independently and use the provided USB-C extension cable to get strong solar power. The camera can be
mounted on a wall or on the ceiling.
1. Drill holes with a 15/64 inch (5.95 mm) drill bit with the provided positioning card, then insert the anchors into the holes.
2. Connect the solar panel to the camera using the provided USB-C extension cable.
3. Firmly secure the camera onto the mounting bracket.
Be careful not to install by mistake.
4. Install the mounting bracket of the solar panel in a suitable position.